Tools
FLUKE
MODEL: 1857FC
COMES WITH PROTECTIVE CASE
FLUKE I400 AC CURRENT CLAMP
HARD CARRY CASE
CD-ROM MANUAL
Ingersoll Rand
Cordless Screwdriver
Model: qxc2pt12pq4
This item is used in working condition
Comes with 1 charger bc1121
1q v12 1q v20 series li-ion charger
2 Batteries bl2022
20 volts lithium ion x5.0
Increase the productivity of your assembly line with the 20V pistol QXC Precision Screwdriver. Offering 8 programmable configurations in a single tool.
Milwauke grinder
model: 2780-20
Power state brush less motor: delivers maximum power and up to 10X longer motor life Red link plus intelligence provides optimized performance, electronic clutch, and overload protection using total system communication between tool, battery and charger
Red lithium X C5.0 battery pack (not included) provides superior pack construction, electronics, and performance to deliver 2X more run-time and more work over pack life
Power to grind: world’s first cordless grinder with corded performance
Durability: same metal housing and gearing system as legendary high performance corded grinders
100% tool free: make all accessory changes and guard adjustments without a wrench for increased productivity
Paddle-switch design: provides increased comfort and ease-of-use when operating in various positions
Compatible with all M18 batteries
millwaukee
2 piece combo set
model: 2462-20 2407-20
with bag, charger and 4 batteries
Drill/Driver Delivers up to 275 in lbs of Torque.
Drill/Driver's On-board battery fuel gauge displays remaining run time
Drill/Driver Features New ergonomic handle design for increased comfort
Drill/Driver Features Metal Ratcheting Chuck for maximum durability
Impact Driver's Milwaukee Impact Mechanism delivers 1,000 in-lbs of torque
Impact Driver Delivers 0-2,500 RPM for increased fastening speed
&l
FLUKE
MODE: 87V
This advanced meter works on VSDs, checking power quality, and industrial troubleshooting on motor drives, power distribution, and electromechanical equipment. Delivers accurate frequency measurements on adjustable speed drives . Works in a noisy environment, as well as in high altitude locations. Also tests for continuity, resistance, and diode. Features auto and manual ranging for maximum flexibility. Min./max. recording alert captures variations automatically.
craftsman
3/8 inch torque wrench
model: cmmt99433
Drive Size 3/8 INCH
Torque Increments Foot, Pounds = 0.5
Minimum Torque Measure = 20
Maximum Torque Measure = 10
KOBALT SGY-AIR106 KEYLESS CHUCK AIR DRILL
ITEM HAS SLIGHT WEAR FROM PREVIOUS USE
IN GOOD CONDITION
ITEM IS A 3/8" DRILL
2,200 RPM
ITEM HAS A FORWARD AND REVERSE SWITCH NEAR THE TRIGGER
MATCO TOOLS AIR HAMMER
ITEM HAS NORMAL WEAR ON IT FROM PREVIOUS USE
ITEM DOES NOT COME WITH AN AIR FITTING
ITEM HAS BEEN TESTED
IS MISSING THE BOTTOM CAP
BAUER
MODEL: 1631E-B
Hard hitting 12.5 amp motor ensures powerful performance
Variable speed control dial matches speed to application
Impact rate of 1900 BPM with 18 ft. lbs. of impact energy
Adjustable 360° side handle for maximum comfort and control
Anti-vibration control
Accepts industry standard SDS Max-Type bits
Ergonomic handle with shock absorbent anti-vibration technology prevents strain and fatigue
Quick change bit retention
Ball bearing constructi
UNKNOWN NAME OR MODEL NUMBER AIR SANDER
ITEM HAS SIGNIFICANT WEAR FROM PREVIOUS USE
ITEM I BELIEVE IS MISSING THE COVER FOR THE TRIGGER
ITEM HAS BEEN TESTED
DOES NOT COME WITH AN AIR FITTING
MILWAUKEE
MODEL: 1680-20
SUPER HAWG 1/2 INCH
120 VOLTS
13 AMPS
COMES WITH SIDE HANDLE. DOES NOT HAVE CHUCK KEY
UNIVERSAL TOOLS UT=8964A AIR SCREWDRIVER
ITEM HAS WEAR FROM PREVIOUS USE
ITEM DOES NOT COME WITH AN AIR FITTING OR ANY OTHER ACCESSORIES
ITEM IS 1,800 RPMS
HITACHI
MODEL: CR13V
POWERFUL 10 AMPS
KEYLESS BLADE CLAMP
STROKE LENGTH IS 1- 1/8 INCH
THIS ITEM IS USED WITH PREVIOUS USE.
CORD HAS A SMALL DAMAGE SPOT.
DEVILBISS DV1270-01 AIR SANDER
ITEM HAS NORMAL WEAR ON IT FROM PREVIOUS USE
ITEM DOES COME WITH AN AIR FITTING
ITEM HAS BEEN TESTED
ITEM IS A 5" HIGH SPEED AIR SANDER
DEVILBISS AT30 AIR HAMMER/CHISEL
ITEM HAS WEAR FROM PREVIOUS USE
ITEM COMES WITH AN AIR FITTING
ITEM HAS BEEN TESTED
BRUTE 201753 AIR CHISEL
ITEM HAS WEAR FROM PREVIOUS USE
ITEM DOES NOT COME WITH AN AIR FITTING OR ANY OTHER ACCESSORIES FOR THE CHISEL
ITEM IS 4,500 RPMS
AIR CONS: 5.8CFM @90PSI
ITEM HAS BEEN TESTED
ASSORTED SNAP ON LOOSE TOOLS
SNAP ON- PPC1001 Bronze Tapered Punch
SNAP ON- TM5 1 /4" Drive Sliding T-Handle Breaker Bar
SNAP ON- 3/8" drive 6" Knurled Extension
SNAP ON OEXM140 14MM CHROME 12-POINT COMBINATION WRENCH
HDC PH7 AIR CHISEL
THIS AIR CHISEL HAS NORMAL WEAR FROM PREVIOUS USE
DOES NOT HAVE A BIT RETAINING SPRING
INCLUDES AIR FITTING FOR QUICK CONNECTION TO AIR HOSE
IDEAL
DIGITAL INSULATION TESTER
MODEL: 61-795
Checks new installations for proper insulation
Checks existing installations and motor windings for breakdowns in insulation
Analog bar graph
AC/DC voltage 0.1-Volt to 600-Volt
Cat IV – 600-Volt, Cat III – 1000-Volt
Continuity with 200 mA
Auto discharge
Auto power off
Resistance 0.1 to 199.9 Ohm
Continuity 0.01 Ohm to 19.99 Ohm
CRAFTSMAN MODEL: cmcb204 One New Craftsman Battery Details:  20-vt MAX 4Ah High Capacity Lithium battery provides extreme runtime for heavy duty jobsite applications. Professional grade high energy cells for improved power. Longer cycle life resulting in an extended battery life. 3-LED State of charge indicator for immediate battery charge feedback. No memory and virtually no self-discharge for maximum productivity. For powering V20 cordless outdoor power equipment and V20 cordless power tools( TOOLS NOT INCLUDED). ***INCLUDES ONE CRAFTSMAN 20-v MAX 4.0AH LITHIUM ION BATTERY, NOTHING ELSE. PLEASE SEE PICTURE FOR DETAIL!***
Franklin Fueling SCR-025-110 Adjustable Rotary Scraper This item is in gently used condition, this does have wear on it from previous use. This tool is intended to be used exclusively for the removal of the oxidized layer on polyethylene pipes in preparation for the electrofusion process. Does come with the Allen wrench to change out the blade and a case. Please See Photos For More Details!
BrassCraft BC260 Auger This item is in used condition, has wear on it from previous use. Has been tested and does work as intended. This DOES NOT come with the foot switch or the 4 piece cutter set. This is the auger ONLY! Please See Photos For More Details!
the Salisbury 4544 is a non-contact high voltage detector for use in applications for voltages from 240V to 230kV. It is intended for use in verifying the live or de-energized status of conductors, bus bars, and other types of exposed electrical equipment
KOBALT MODEL: SGY-AIR222 Forward/Reverse Rocker Switch Air Drill  About this item: Lightweight composite construction Keyless chuck for easy bit changes One-handed forward/reverse switch Ft.-lbs. torque (Foot/lbs.) 50  Capacity: 3/8-in Tool Weight (lbs.) : 2.39 ChuckType:Keyless Forward/Reverse Rocker Switch: Yes RPM's (RPM) 2000 *** INCLUDES One  Kobalt Forward/Reverse Rocker Switch Air Drill  Model: SGY-AIR222. Everything else is sold separately. PLEASE SEE PICTURES FOR DETAILS!***
Black and Decker. Powerful 6.5 Amp motor; operates at 10,000 RPM. Comes with guard, no handle.
GREEN LEE SLUG BUSTER KNOCK OUT PUNCH OUT KIT MODEL: 7238SB Includes 1" Hex Head Ratchet Wrench, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2" Slug Buster Punches and Dies, Draw Studs and Plastic Carrying Case
Louisville FC1207 Fiberglass Step to Straight Ladder This ladder is in used condition. There are no cracks or breaks in the fiberglass This has a 375lbs. load capacity. This is 7' ladder with a highest standing level of 7' 5". Total length of both sections in 14ft Maximum working length is 11ft. This is equipped with: Hinging mechanism Runglock Double Rivet Step Construction Please See Photos For More Details!
Snap On TM5 T-Handle This is in gently used condition. This is a 1/4" drive T-Handle. Does have a personal engraving on it but does not effect the integrity of this tool.
CHICAGO ELECTRIC MODEL: 68861 MULTIFUNCTION POWER TOOL ABOUT THIS ITEM: This easily affordable multifunction power tool from Chicago Electric works at 21000 OPM to put some real power into the tough jobs, and it's easy to switch the attachments depending on the task at hand. The multifunction power tool cuts through cable, air ducts, downspouts, plasterboard and pipes... sands down cement, concrete, stone, plaster, tile adhesive, paint and wood... even saws through wood up to 2 in. thick! A multi-use tool like this is perfect for remodeling and repair jobs, as well as hobbies, tile, car repairs, even scraping freshly painted windows or old floor coverings. Delivers 0-21000 OPM (oscillations per minute) Unique spindle and blade arbor design positively locks the blade in 7 forward positions for added versatility Perfect for remodeling and repairs jobs, as it can be used for hobbies, tile, car repairs, windows or floor coverings Die cast aluminum gear housing Sealed bearings for long life Low vibration design INCLUDES: ONE CORDED CHICAGO ELECTRIC TOOL IN ORIGINAL CASE ,ONE BIM/WOOD METAL, ONE SANDING TOOL WITH 4 PACKS OF SANDING PAPER, AND ONE HISS WOOD/ METAL.
Husky H4790 Dual Action Air Sander This item has wear on it from previous use. Has been tested and does work as intended. This does not come with an air adapter or pad.
tpi 715 gas analyzer Operating Temperature Range 14 degrees F to +122 degrees F (-10 degrees C to +50 degrees C)Battery / Battery Life AA (3) / > 6 Hours Charger Input Voltage 12V DC (Cigarette lighter adapter incl.)Fuels Natural Gas, LPG, Light Oil, Heavy Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse Units of Pressure m bar, kPa & in H2O Display 3 Line Back lit LCD w/ annunciators Data Storage 10 sets of readings Data Logging 400 sets of readings Single Logging 150 sets of readings Time & Date 24 Hour Real Time ClockDimensions7.8 inch x 3.5 inch x 2.4 inchWeight1.1lbs Gases Oxygen Range 0-25 percentResolution0.1 percent Accuracy+/- 0.3 percent Carbon Monoxide Range 0-9.999 percentResolution0.001 percent Accuracy+/- 5 ppm or 5 percent Nitric Oxide Range 0-5,000 ppm Resolution 1 ppm Accuracy+/- 5 ppm to 5 percent Carbon Dioxide Accuracy Calculated CO/CO2 Ratio Range 0-0.999Resolution0.001Combustion Eff. Range 0-100 percent Pressure Measurement Selectable Ranges mbar, kPa and in H2O Range-120 in H2O to 120 inH2OResolution0.001 in H2O Accuracy+/- 0.5 percent fsd Temperature Measurement Input Type K-Type thermocouple Range-58 degrees F to 1832 degrees F (-50 degrees C to 1000 degrees C) Resolution 1 degrees F (1 degrees C)Accuracy+/- (0.3 percent of rdg + 2 degrees F) or +/- (0.3 percent of rdg + 1 degrees C) TPI A740 Features Power On indication (red LED) Adjustable contrast (low, norm, high) Manual paper feed (advance) Operates on 4 "AA" batteries or optional AC adapter Self test at Power On 18 inch maximum transmitting distance Thermal paper Back side magnet
Provides TWO auditory and visual signals to user to indicate that torque value has been reached - repeated beeps and a green light indicate 90% of desire torque value has been reached One long beep with a red light indicates that 100% of the desired torque value has been reached 5-button control pad allows you to preset your torque value, change units of measure, change mode of operation with peak/angle/follow choices, save readings and select read-out unit of measure LCD display clearly shows preset slot, mode of operation, units of measure and torque value Quick release button and directional switch make this torque wrench easy to use
MILWAUKEE DEMOLITION HAMMER DRILL 2-speed impact mode: use low (2,200 BPM) for light materials or high 2,840 BPM for the toughest concrete. Powerful 14 Amp 1,300 MWO Milwaukee motor: provides best-in-class power and highest overload protection. AVS Anti-Vibration System: minimizes vibration for maximum comfort. Mechanical clutch: protects the motor when the bit binds. Variable-position chisel stop: fixes the chisel in 12 positions for various applications. Specially designed D-handle provides enhanced grip and control. Heavy-duty crank piston mechanism: provides 8.8 ft. lbs. of torque for hard hitting performance.
KLEIN COAX EXPLORER PLUS TESTER Low-voltage and high-tech, the Klein Tools VDV Coaxial Explorer Plus Tester helps professionals get the job done. It is designed to test continuity in coaxial cables. The tester also provides cable status with bright LED indicators. -Tests coaxial cable continuity and maps/IDs up to 4 locations simultaneously -Color coded remotes simplify identification -Simple push button operation -Compact size fits easily into pocket or pouch BRAND NEW IN PACKAGE
AIR NESCO ABOUT: -NP 701A -1/4â Mini Angle Die Grinder -Lightweight composite body -Variable speed control -Rear swivel exhaust SPECIFICATIONS: -Free Speed: 20,000 RPM -Rated Power: 0.3 hp -Collet Size: 1/4 in. THIS ITEM IS PREOWNED IN GREAT WORKING CONDITION
popular products
-
Zebco 5020 Reel$14.79 -
BOSE LIFE STYLE THEATER SYSTEM$289.79
Was$499.00 -
PIONEER$69.99
new arrivals
-
HORNADY 6MM CREEDMOOR$35.00 -
Smith And Wesson 38 Revolver$699.00 -
COLT colt 22$699.00 -
fluke 1587 fc$499.00
