Craftsman

model: cmes610

5-Amp Variable Speed Keyless Corded Jigsaw

Dewalt 10 amp

band saw

model: dwm120

Craftsman 18 gauge nailer

Cps vacuum pump. 2 stage. model: vp6d

Milwaukee 

M18 

model: 2625-21 ct

Cordless hacksaw new in box

Milwaukee Fuel 18V Drill With Charger And M18 XC5.0 Battery

hyper tough

model: ht12c1w

drive size is 1/2 inch

max torque is 550adjustable 3 speed regulator

KOBALT SGY-AIR106 KEYLESS CHUCK AIR DRILL
ITEM HAS SLIGHT WEAR FROM PREVIOUS USE
IN GOOD CONDITION
ITEM IS A 3/8" DRILL
2,200 RPM
ITEM HAS A FORWARD AND REVERSE SWITCH NEAR THE TRIGGER

MATCO TOOLS AIR HAMMER
ITEM HAS NORMAL WEAR ON IT FROM PREVIOUS USE
ITEM DOES NOT COME WITH AN AIR FITTING
ITEM HAS BEEN TESTED
IS MISSING THE BOTTOM CAP

UNKNOWN NAME OR MODEL NUMBER AIR SANDER
ITEM HAS SIGNIFICANT WEAR FROM PREVIOUS USE
ITEM I BELIEVE IS MISSING THE COVER FOR THE TRIGGER
ITEM HAS BEEN TESTED
DOES NOT COME WITH AN AIR FITTING

MILWAUKEE

MODEL: 1680-20

SUPER HAWG 1/2 INCH 

120 VOLTS

13 AMPS

COMES WITH SIDE HANDLE. DOES NOT HAVE CHUCK KEY

 

HITACHI

MODEL: CR13V

POWERFUL 10 AMPS

KEYLESS BLADE CLAMP

STROKE LENGTH IS 1- 1/8 INCH

THIS ITEM IS USED WITH PREVIOUS USE.

CORD HAS A SMALL DAMAGE SPOT.

DEVILBISS DV1270-01 AIR SANDER
ITEM HAS NORMAL WEAR ON IT FROM PREVIOUS USE
ITEM DOES COME WITH AN AIR FITTING
ITEM HAS BEEN TESTED
ITEM IS A 5" HIGH SPEED AIR SANDER

DEVILBISS AT30 AIR HAMMER/CHISEL
ITEM HAS WEAR FROM PREVIOUS USE
ITEM COMES WITH AN AIR FITTING
ITEM HAS BEEN TESTED

BRUTE 201753 AIR CHISEL
ITEM HAS WEAR FROM PREVIOUS USE
ITEM DOES NOT COME WITH AN AIR FITTING OR ANY OTHER ACCESSORIES FOR THE CHISEL
ITEM IS 4,500 RPMS
AIR CONS: 5.8CFM @90PSI
ITEM HAS BEEN TESTED

ASSORTED SNAP ON LOOSE TOOLS

 SNAP ON- PPC1001  Bronze Tapered Punch

 SNAP ON- TM5 1 /4" Drive Sliding T-Handle Breaker Bar

SNAP ON-  3/8" drive  6" Knurled Extension

SNAP ON OEXM140 14MM CHROME 12-POINT COMBINATION WRENCH 

SNAP ON-  DS2422 - 3/8INCH , 11/32INCH  OFF SET WRENCH

SNAP ON-  DS2224 - 11/32INCH ,  3/8INCH OFF SET WRENCH

SNAP ON-  DS1820 - 9/32INCH ,  5/16INCH OFF SET WRENCH

<

HDC PH7 AIR CHISEL
   THIS AIR CHISEL HAS NORMAL WEAR FROM PREVIOUS USE
DOES NOT HAVE A BIT RETAINING SPRING
INCLUDES AIR FITTING FOR QUICK CONNECTION TO AIR HOSE

Franklin Fueling SCR-025-110 Adjustable Rotary Scraper This item is in gently used condition, this does have wear on it from previous use. This tool is intended to be used exclusively for the removal of the oxidized layer on polyethylene pipes in preparation for the electrofusion process. Does come with the Allen wrench to change out the blade and a case. Please See Photos For More Details!

BrassCraft BC260 Auger

This item is in used condition, has wear on it from previous use.

Has been tested and does work as intended.

This DOES NOT come with the foot switch or the 4 piece cutter set.

This is the auger ONLY!

Please See Photos For More Details!

Piranha Programmable with custom LCD Digital Peak Charger

Salisbury 4544 Self Testing Voltage Detector

Self Testing Voltage Detector Features:

Verify live or de-energized conductors

May be used with rubber insulating gloves or hot sticks using the splined universal end fitting

Indicate the presence of volatage with an extra bright LED light and a distinctive audible signal

With case and

8' Hot Stick By Hastings HV-208

ent

KOBALT

MODEL: SGY-AIR222

Forward/Reverse Rocker Switch Air Drill  

About this item: 

Lightweight composite construction

Keyless chuck for easy bit changes

One-handed forward/reverse switch

Ft.-lbs. torque (Foot/lbs.) 50
 Capacity: 3/8-in
Tool Weight (lbs.) : 2.39
ChuckType:Keyless
Forward/Reverse Rocker Switch: Yes
RPM's (RPM) 2000
*** INCLUDES One  Kobalt Forward/Reverse Rocker Switch Air Drill  Model: SGY-AIR222. Everything else is sold separately. PLEASE SEE PICTURES FOR DETAILS!***

Black and Decker. Powerful 6.5 Amp motor; operates at 10,000 RPM. Comes with guard, no handle.

Louisville FC1207 Fiberglass Step to Straight Ladder

This ladder is in used condition.

There are no cracks or breaks in the fiberglass

This has a 375lbs. load capacity.

This is 7' ladder with a highest standing level of 7' 5".

Total length of both sections in 14ft

Maximum working length is 11ft.

This is equipped with:

Hinging mechanism

Runglock

Double Rivet Step Construction

Please See Photos For More Details!

Snap On TM5 T-Handle

This is in gently used condition.

This is a 1/4" drive T-Handle.

Does have a personal engraving on it but does not effect the integrity of this tool.

CHICAGO ELECTRIC 

MODEL: 68861

MULTIFUNCTION POWER TOOL



ABOUT THIS ITEM: 

This easily affordable multifunction power tool from Chicago Electric works at 21000 OPM to put some real power into the tough jobs, and it's easy to switch the attachments depending on the task at hand. The multifunction power tool cuts through cable, air ducts, downspouts, plasterboard and pipes... sands down cement, concrete, stone, plaster, tile adhesive, paint and wood... even saws through wood up to 2 in. thick! A multi-use tool like this is perfect for remodeling and repair jobs, as well as hobbies, tile, car repairs, even scraping freshly painted windows or old floor coverings.

Delivers 0-21000 OPM (oscillations per minute)
Unique spindle and blade arbor design positively locks the blade in 7 forward positions for added versatility
Perfect for remodeling and repairs jobs, as it can be used for hobbies, tile, car repairs, windows or floor coverings
Die cast aluminum gear housing
Sealed bearings for long life
Low vibration design
INCLUDES: ONE CORDED CHICAGO ELECTRIC TOOL IN ORIGINAL CASE ,ONE BIM/WOOD METAL, ONE SANDING TOOL WITH 4 PACKS OF SANDING PAPER,  AND ONE HISS WOOD/ METAL.

Husky H4790 Dual Action Air Sander

This item has wear on it from previous use.

Has been tested and does work as intended.

This does not come with an air adapter or pad.

tpi 715 gas analyzer Operating Temperature Range 14 degrees F to +122 degrees F (-10 degrees C to +50 degrees C)Battery / Battery Life AA (3) / > 6 Hours Charger Input Voltage 12V DC (Cigarette lighter adapter incl.)Fuels Natural Gas, LPG, Light Oil, Heavy Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse Units of Pressure m bar, kPa & in H2O Display 3 Line Back lit LCD w/ annunciators Data Storage 10 sets of readings Data Logging 400 sets of readings Single Logging 150 sets of readings Time & Date 24 Hour Real Time ClockDimensions7.8 inch x 3.5 inch x 2.4 inchWeight1.1lbs Gases Oxygen Range 0-25 percentResolution0.1 percent Accuracy+/- 0.3 percent Carbon Monoxide Range 0-9.999 percentResolution0.001 percent Accuracy+/- 5 ppm or 5 percent Nitric Oxide Range 0-5,000 ppm Resolution 1 ppm Accuracy+/- 5 ppm to 5 percent Carbon Dioxide Accuracy Calculated CO/CO2 Ratio Range 0-0.999Resolution0.001Combustion Eff. Range 0-100 percent Pressure Measurement Selectable Ranges mbar, kPa and in H2O Range-120 in H2O to 120 inH2OResolution0.001 in H2O Accuracy+/- 0.5 percent fsd Temperature Measurement Input Type K-Type thermocouple Range-58 degrees F to 1832 degrees F (-50 degrees C to 1000 degrees C) Resolution 1 degrees F (1 degrees C)Accuracy+/- (0.3 percent of rdg + 2 degrees F) or +/- (0.3 percent of rdg + 1 degrees C) TPI A740  Features Power On indication (red LED) Adjustable contrast (low, norm, high) Manual paper feed (advance) Operates on 4 "AA" batteries or optional AC adapter Self test at Power On 18 inch maximum transmitting distance Thermal paper Back side magnet

Milwaukee

   SDS-MAX Demolition Hammer

Model:5446-21

With Carry Case

2-speed impact mode: use low (2,200 BPM) for light materials or high (2,840 BPM) for the toughest concrete

Powerful 14 Amp 1,300 MWO Milwaukee motor: provides best-in-class power and highest overload protection

AVS Anti-Vibration System: minimizes vibration for maximum comfort

Mechanical clutch: protects the motor when the bit binds

Variable-position chisel stop: fixes the chisel in 12 positions for various applications

Specially designed D-handle provides enhanced grip and control

Heavy-duty crank piston mechanism: provides 8.8 ft. lbs. of torque for hard hitting performance

THIS ITEM IS IN LIKE NEW CONDITION

KLEIN
COAX EXPLORER PLUS TESTER

Low-voltage and high-tech, the Klein Tools VDV Coaxial Explorer Plus Tester helps professionals get the job done. It is designed to test continuity in coaxial cables. The tester also provides cable status with bright LED indicators.

-Tests coaxial cable continuity and maps/IDs up to 4 locations simultaneously
-Color coded remotes simplify identification
-Simple push button operation
-Compact size fits easily into pocket or pouch

BRAND NEW IN PACKAGE

AIR NESCO

ABOUT:

-NP 701A
-1/4” Mini Angle Die Grinder
-Lightweight composite body
-Variable speed control
-Rear swivel exhaust

SPECIFICATIONS:
-Free Speed: 20,000 RPM
-Rated Power: 0.3 hp
-Collet Size: 1/4 in.

THIS ITEM IS PREOWNED IN GREAT WORKING CONDITION